Light Bearing Holster – Inside the Waistband Kydex Holster

(11 customer reviews)



Light Bearing Holster – IWB Kydex Holster

. Lead time is roughly 10 business days to ship from us depending on your setup for these light bearing holsters

. All light bearing holsters come optic ready!  If you do not have optic, it will not effect fit at all.

. Custom Engineered and Designed for your Exact Set-up

.Quick and Easy to take on and off

. Adjustable Retention

. Adjustable Cant Angle from 0-15 Degrees with the Standard Clip and Monoblock Clip ( no ride height adjustment with these clips )

. Adjustable Ride Height with the Tuckable clip and ulticlip ( no cant adjustment with these clips though )

. If you do not see your gun / light combo, please email request to us at:  [email protected] , and we will add it to our request list!

SKU: Light Bearing Holster - IWB Kydex Light Bearing Holster Category:


Have you been looking for a Light Bearing Holster?  Well, the search is over as we are here to get you taken care of!

We are always trying to add as many options as possible for our loyal customers.  If you have a pistol / light setup that you do not see on our list you can email us your request at: [email protected].  If we get enough request for certain molds we will do our very best to get them added to our line-up!

Light Bearing Holster – Inside the Waistband Kydex Holster

.  Adjustable Cant Angle from 0-15 degrees on the standard clip and monoblock clip options.  The ulticlip and tuckable clip have adjustable ride height, however no cant adjustment. Everyone likes to carry in different positions and angles, so with our adjustable cant angle you can carry anyway from appendix carry to 4-5 o’clock with the same holster.  To adjust the cant angle you simply loosen the two screws holding the belt clip on, move the belt clip to desired angle, then tighten the two screws back up.

.  If you need to take off your Light Bearing Holster , you can have your holster off in a fews seconds.  There is no need to undo your pants or belt, you can simply slide these holster on and off.  Also because of the constant retention, your firearm will be secure whether you are wearing the holster or not!

.  We only use top quality .80 kydex to ensure a holster that will last a lifetime.  This kydex thickness provides a sturdy holster that will not collapse, for easy re-holstering.  However, it is thin enough that you do not sacrifice comfort or add bulk to your Light Bearing Holster.

.  Our Light Bearing Holster comes standard with a sweat shield.  A sweat shield protects your body from the firearm for comfort.  It also protects your firearms finish from sweat and skin oils.  Another huge benefit of a full sweat shield is that it makes re-holstering your firearm way easier without the worry of pinching your skin.

.  These Light Bearing Holster only weight a couple ounces, so they add no weight or bulk to your concealed carry set-up!

More options

.  You have multiple belt clip options when you order your Light Bearing Holster.

—The standard clip is included in the price of the holster and fits belts up to 1.5″.

—The Monoblock also fits all 1.5″ belts however is a metal clip with dual springs that work independently of each other.  This makes it more secure on your belt.

—The Dual Soft Loops are the most secure option, however are also the most difficult to take on and off.  The soft loops snap independently for a secure attachment at all time.

—The ulticlip is great for those that do not wear belts.  However, we do not suggest them as the guns get bigger and heavier.  A belt is really needed to support weight of that big of setup.

—The tuckable clip fits all belts up to 1.75″.  It leaves a gap between holster and clip that you can tuck your shirt into to conceal your weapon if you so choose.


.  All of our Light Bearing Holster come with the option to add a claw attachment.  The claw is designed to ride against your belt and push the grip of the firearm into your body.  This eliminates printing and makes concealing your mid to full size firearms much easier!

.  We have over 40 color options to allow you to give your Light Bearing Holster a custom look just right for YOU!


.  Best Value in the Industry –  We are not the cheapest holster, but far from the most expensive.  We have developed special systems in our production that have allowed us to build the BEST quality Light Bearing IWB Kydex Holster on the market and give you the most bang for your hard earned money!

.  All Light Bearing Holster orders will ship from our facility in roughly 2 to 3 weeks!  These Light Bearing Holster are custom molded to each order and setup so it just takes a little more time than non-light bearing holsters.


If you are looking for a regular Inside the Waistband Holster for pistols WITHOUT lights on them you can see them by clicking here:

11 reviews for Light Bearing Holster – Inside the Waistband Kydex Holster

  1. Eric (verified owner)

    Excellent holster and outstanding customer service. I had a number of questions to fix an error I made in my order. Kevin and his team was extremely attentive and responded to me within an hour with everything resolved. Wonderful craftsmanship, honorable people, and a fair price, cannot ask for more!

  2. Camron OReilly

    Great company with a great product. Customer service is next to none. No matter what day of the week you will receive a timely response that addresses all of your questions. The IWB holster has a variety of attachment options that can meet any need you may have.

  3. Chris Matheson (verified owner)

    Received this yesterday for a S&W 5.7. Really impressed with the fit and quality. Haven’t had a chance to carry with it yet, but looking forward to it. Seems comfortable from what I can tell. Would highly recommend.

  4. Mark Flexter (verified owner)

    Muddy River Tactial are the only holsters that I will buy these are Great Holsters made with very well made materials and quality and workmanship! I used to carry a Glock 45 Gen 5 MOS and a Shadow Systems XR920 Elite at the 3:00 and 3:30 position for years! But when Sig Sauer came out with the Sig 365 X macro Comp I started carrying appendix at the 1:00 position! I liked the Sig 365 X macro Comp so much that when the Sig AXG 365 Legion came out I bought that also both of them are great appendix carry pistols! But I couldn’t find the right appendix holster that I was looking for! I run a Holosun EPS Carry 6 MOA green dot and a Streamlight TLT-7A pistol light on all my pistols! A lot of holster companies out there are made of thin cheap materials and the quality of the holster is cheap or they tell you on there websites that they have a full sweat shield only to be disappointed when you receive your holster! And the sweat shield is not a full sweat shield after all a full sweat shield goes all the way to the top of your slide! And a lot of other holster company’s don’t cover the slide release or they don’t offer there holsters with the TLR-7A light they offer it with the TLR-7A Sub instead! But at Muddy River Tactial there holsters are Great when you buy there holsters you get a full sweat shield all the way to the top of your slide! And your slide release will be covered and they offer there holsters with the TLR-7A light! The other issue I had with other holster companies was that when I would practice my drawing skills there claw would hit my knuckle on my middle finger and it would be uncomfortable because I would practice drawing my pistol fast! But at Muddy River Tactial I do not have any problem practicing my drawing skills with there holsters I get a full grip on my pistol and my knuckle doesn’t even hit or rub the claw on there holsters! I will be buying more holsters from Muddy River Tactial these are Great Holsters! Thank you Muddy River Tactial

  5. Mark Flexter (verified owner)

    I have bought 5 appendix inside the waistband holsters with the claw and I love them! I just recently started carrying appendix I use to carry a Glock 45 Gen 5 Mos and a Shadow Systems XR920 Elite at around the 3:00 or 3:30 position but when Sig Sauer came out with the Sig 365 X macro comp! I loved it so much I went out and bought the Sig AXG 365 macro legion when it came out! I have tried other holster companies and haven’t found the right one they either are made of cheap quality or they don’t offer a mounted pistol light in there holsters! I run a Holosun EPS carry 6 MOA green dot and a Streamlight TLR-7A mounted pistol light on all my pistols! I was on one of my Sig 365 pistol groups or Facebook and somebody was asking about what holsters does everyone carry for appendix! And someone mentioned Muddy River Tactical which I wasn’t familiar with so I got on there website and I bought one to try out to see if I would like it or not and when I received it I put it on I Loved it just to make sure I wore it for a couple of days and I Loved it even more! It is a very well made holster made of good quality of materials and workmanship! A lot of appendix holsters that didn’t work out for me that I have purchased from other holster companies in the past is when I go to draw my pistol the claw would hit my middle nuckle on my middle finger and it would hurt and when I would practice drawing my pistol I would draw fast! But with Muddy River I do not have that problem because my hand clears the claw without any problems I will be buying more holsters from Muddy River Tactial they are the only holster that I will buy! Thank you Muddy River Tactial!

  6. Christian (verified owner)

    Just got our Muddy River holsters yesterday for the Sig P365 AXG Legion.
    They showed up within a week and we aren’t disappointed at all. The gun fits nice and the adjustable magazine holster is an excellent add on.

  7. Omar R. (verified owner)

    I’m on my third holster from muddy river tactical. They were the only ones I could find that would make a holster for my S&W M&P 2.0 Compact 3.6” paired with an Olight PL-Mini 2 Valkyrie. If you get their light bearing holsters, they are pretty comfortable when you pair them with the claw. The only thing I would like is to have the same clicking when re-holstering as you would get that in their IWB holster without a light.

  8. Dale McAllister (verified owner)

    I couldn’t find an IWB holster for my S&W Equalizer with the Olight Baldr Mini and Holosun optic until I found the Muddy River Tactical website one afternoon. It was easy to order, was produced rapidly, and would have been delivered rapidly if the USPS had done their job properly. Firearm fit was better than anticipated except for two very minor adjustments. Firearm retention was a little too strong for my liking, and TS interference had to be eliminated for the safe position. Both were easy fixes. It is very comfortable on my skinny body and will work out very well for a long time. Plan to soon replace my Sig P365 holster with a Muddy River IWB holster.

  9. Jon (verified owner)

    Looked everywhere for a good holster but muddy river was the only one to have the exact model and light I needed. Got the holster way quicker than expected. Truly couldnt be any happier with the product. Fits great and the claw eliminates any printing issues I had before. I will be getting all of my holsters exclusively from muddy river.

  10. J shaw (verified owner)

    I’ve bought a few holster from muddy river tactical and I just got this one for my X macro as usual another great holster .. the fit and finish is top notch ,comfortable and tucks great. If you want a awesome holster just order one , you will not be disappointed one bit

  11. Mike Latusick (verified owner)

    Canik TP9 SC with Olight Valkryie Mini 2 and Sightmark Mini Red dot optic.
    Light bearing IWB holster with standard belt clip and claw.
    Gunmetal grey.
    The holster only took 7 days from order to arrival at front door!
    Packaged well!
    The holster fit the Canik TP9 SC……PERFECTLY.
    Matches the Canik grey and black really well and makes a nice combination.
    Tight and secure but easy enough to draw comfortably. The claw works well to hold the holster contents snug and decrease printing.
    The bottom of the holster (business end of barrel) is tucked and rounded and increases carry comfort.
    My advise…..if you have a Canik TP9 SC — look no further for the perfect IWB light bearing holster.
    Nice looking – perfect fit – extremely well made – quick ship – doesn’t break the bank!

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

  • Inside the Waistband Kydex Holster

    Select options
  • Duty Holster

    Mach Series Duty & Range Holster

    Select options
  • Glock 19 Outside Waistband Holster

    Outside the Waistband Kydex Holster

    Select options
  • Paddle Holster – Outside the Waistband Kydex Paddle Holster

    Select options